Advertisement
5. Operator menu
5. Using the operator menu
The operator menu is not available by default due to the keyboard lock.
To disable the lock, refer to system settings on page 13.
Press the minus and plus buttons simultaneously to open the operator
menu. The following buttons are used for navigation:
5 - Option/previous menu:
Return to the previous menu
6 - Minus:
Go to the next menu option
7 - Plus:
Go to the previous menu option
8 - Enter:
Select or enable the chosen option
The following settings can be adjusted (see Figure 37):
Language
Camera settings
Set video channel
5.1. Language
This option opens the language selection menu (see Figure 38).
The selected language will be used for all OSD (On Screen Display)
menus. The OSD menu is available in English, Dutch, German,
French, Czech, Italian, Polish, Portuguese, Spanish, Turkish, Swedish,
Finnish, Danish and Norwegian.
5.2. Camera settings
Horizontal line mark
Enable this option to show a reference line. The reference line is
displayed as a horizontal green line. See Figure 40.
Line position
Adjusts the vertical height of the reference line. 0 corresponds to
the top edge of the monitor and 100 to the bottom edge.
Vertical line mark
Enable this option to show a reference line. The reference line is
displayed as a vertical green line. This option is not available on all
RLED/LEDD models. See Figure 40.
Line position
Adjusts the vertical position of the reference line. This can be set
between 38 and 63. The left and right sides swap position depend-
ing on the settings of the camera mirror-image function.
Graticule
This option shows a graticule for a rearview camera on the monitor.
See Figure 40.
16
1
Button
(see Figure 39)
4
Button
objects in
C3
monitor are
C2
closer than
C1
they appear
5
Buttons 1
Button
Figure 36
Figure 37
Figure 38
Figure 39
2 3 4 5 6 7 8
6 + 7
Buttons
6 + 7
Buttons
5,6,7,8
Buttons
UM0972011 A 01
Advertisement
