Related Manuals for Orlaco RLED
Summary of Contents for Orlaco RLED
- Page 1 Monitor 12" RLED RLED Serial RLED CAN RLED CAN Radar RLED Serial PL RLED PL User manual Manual No. UM0972050 R1-6 08/2012 English...
-
Page 2: User Manual
= Ice and Fire manual. = NTSC = On Screen Display The camera and monitor systems from Orlaco comply with the lat- = Picture in Picture est CE, ADR, EMC and mirror-directive regulations. All products are = Pan & Tilt Zoom... -
Page 3: Keyboard Overview
Button 8 1. Quick Reference Button 8 Button Keyboard Buttons 3 and 4, setting color saturation Button 7 Button Press the contrast (3) and brightness (4) buttons simultaneously to enable Below is a brief description of the button functions. See sections 3 and 4 for a more detailed explanation. Button 7 the setting mode. -
Page 4: Language Setting For Osd Menu
2. Getting started 3. Keyboard Button 7 2.1. Disclaimer 3.1. Button 1, camera selection Button 8 = Enter/Standby Button 8 = Enter/Standby When switching on the monitor for the first time, a disclaimer ap- Press the camera selection button (1) once (see Figure 2). The Button 7 = Selection/setting Plus(+) Button 7 = Selection/setting Plus(+) pears in English for 5 seconds (see Figure 1). - Page 5 Button 3. Keyboard 3. Keyboard Button 8 Button 7 3.3. Button 3, setting the contrast 3.8. Quick settings Button Button 8 = Enter/Standby Button 7 Press the contrast button (3) once to enable the setting mode (see When in normal image mode, the following quick settings are Button 7 = Selection/setting Plus(+) Figure 7).
-
Page 6: Service Menu
4. Service menu 4. Service menu Button 4. Using the service menu 4.1.9. Vertical line mark Button 8 = Enter/Standby Button Enable this option to show a reference line. The reference line is To open the service menu, simultaneously press the camera selec- Button 7 = Selection/setting Plus(+) displayed as a vertical green line. - Page 7 Figure 26 N F (number in Fahrenheit) The keyboard sound and beeper volume functions are not BNC (bar + number in Celsius) available on all Orlaco monitors. BNF (bar + number in Fahrenheit) 4.3.4. Power settings 4.1.20. Pan/tilt See Figure 28. This menu has the following 2 options:...
- Page 8 This option selects the signal, or CAN protocol, that the monitor 1 camera system. uses. By default this is Orlaco CAN protocol 1. For the Orlaco Radar '3C' for an external system, Orlaco CAN protocol 6 must be set. Other protocols are camera switch →...
-
Page 9: Operator Menu
Button See Figure 41. Enable this option to show a reference line. The reference line is This option sets the video channel for the Orlaco Spectrum Scanner displayed as a horizontal green line. See Figure 40. (see Figure 42). Line position... -
Page 10: System Overview
With Quad picture Camera CMOS Monitor 12” Camera AFZ Camera CMOS Multiview box Camera CMOS Camera CMOS Camera CMOS System options: Indicated are some basic examples, there are more combinations possible, ask ORLACO for the possibilities. UM0972050 R1-6 UM0972050 R1-6... -
Page 11: Overview Of Menus
7. Overview of menus 8. Version details Version R1-0. First release, August 2012. Standby menu Version R1-1. Chapter 4; menu and text changes, Chapter 6; System overview changed, Chapter 7; Menu Enter and text changes, October 2012. Standby menu Version R1-2. Monitor Article number added, page 3; January 2013. Standby Display is on but there is no picture Info... - Page 12 UM0972050 R1-6 UM0972050 R1-6...
- Page 13 ORLACO Orlaco is a Manufacturing company that specializes in making cameras and monitor systems for commercial vehicles, fork-lift trucks, cranes, off shore and maritime. Our objective is to design and produce camera systems for the professional market that improve the drivers’ view and increase operating efficiency.
Need help?
Do you have a question about the RLED and is the answer not in the manual?
Questions and answers