Roland VR-120HD Reference Manual page 140

Menu List
Menu item Value
(bold text: default value)
These settings assign the functions to the GPI.
GPI
When an external control signal is input, the assigned functions are executed.
Category
N/A
PGM Channel Select
PST Channel Select
AUX Channel Select
Input 1–8 Assign
Still Output
PinP & Key 1–4 Source
DSK 1, 2 Source
Button Control
Audio Input Mute
GPI 1–8
Audio Output Mute
Audio Input Solo
Audio Output Solo
Voice Changer
Auto Switching
Reverb (Momentary)
Reverb (Alternate)
Output Fade
Load Memory
Input Scan
Scene Memory Scan
Macro Execute
Sequencer
GPO (One Shot)
GPO (Alternate)
140
Explanation
Value
––
Input 1–8
Input 1–8
Input 1–8
HDMI 1–6, SDI 1–6, Still 1–16
Still 1–16
HDMI 1–6, SDI 1–6, Still 1–16
HDMI 1–6, SDI 1–6, Still 1–16
CUT Button, AUTO Button
MIX Button
WIPE Button
SPLIT 1 Button
SPLIT 2 Button
PinP & Key 1–4 PVW Button
PinP & Key 1–4 PGM Button
DSK 1, 2 PVW Button
DSK 1, 2 PGM Button
USER 1–4 Button
AUDIO EFFECT 1–4 Button
AUDIO PLAYER 1–8 Button
Audio In 1–9/10, USB In, Bluetooth In,
HDMI 1–6, SDI 1–6, Video Player
Main Bus, AUX 1 Bus, AUX 2 Bus, USB
Out, Stream/Record
Audio In 1–9/10, USB In, Bluetooth In,
HDMI 1–6, SDI 1–6, Video Player
Main Bus, AUX 1 Bus, AUX 2 Bus
Audio In 1, 2
––
––
––
––
Memory 1–32
Normal
Reverse
Normal
Reverse
Macro 1–100
Mode On/Off, Next, Previous,
Auto Sequence
GPO 1–16
GPO 1–16
Explanation
No function is assigned.
Switches the video sent to the PGM bus.
Switches the video sent to the PST bus.
Switches the video sent to the AUX bus.
Changes the video assigned to Input 1–8.
Pauses the normal output, and previews or final outputs a
cut of the still image. When a control signal is input again, the
signal output returns to normal.
Switches the video source of the inset screen.
Switches the DSK video source.
This works the same as when you press the button selected in
"VALUE".
Turns the mute function on/off for the input audio.
Turns the mute function on/off for the output audio.
Turns the solo function on/off for the input audio.
Turns the solo function on/off for the output audio.
Turns the voice changer on/off.
Turns the auto switching function on/off.
Reverb turns on only while a control signal is input.
Turns reverb on/off.
The final output video fades in/out.
Recalls a scene memory.
Each time a control signal is input, the final output switches
from Input 1–8 in sequential order.
Each time a control signal is input, the final output switches
from Input 1–8 in reverse order.
The scene memories 1 through 32 are recalled in order each
time a control signal is input.
The scene memories are recalled in reverse order from 32
through 1 each time a control signal is input.
Executes a macro (a series of recorded operations).
When the sequencer function is on, this works the same as
when you press the button selected in "VALUE".
Outputs a control signal for 0.5 seconds.
The control signal output is switched on/off each time a
control signal is input.