Roland VR-120HD Reference Manual page 127

Menu item Value
(bold text: default value)
AUX 1 Bus Adjusts the audio of the AUX 1 bus.
Level
-INF–0 .0–10.0dB
Mute
OFF, ON
Solo OFF, ON
0 .0–500msec
Delay
(0–25.0/29.9/30.0frame)
Reverb Return Level
-INF–0 .0–10.0dB
AUX 1 Bus Send Level
Audio In 1–6
Audio In 7/8–9/10
USB In
Audio Player
-INF–10.0dB
HDMI In 1–6
SDI In 1–6
Video Player
AUX 1 Bus Send Point
Audio In 1–6
Audio In 7/8–9/10
USB In
Dry,
Audio Player
Pre Fader,
HDMI In 1–6
Post Fader
SDI In 1–6
Video Player
Equalizer OFF, ON
Hi Gain -15.0–0 .0–15.0dB
Hi Freq 1.00–10 .0–20.0kHz
Hi-Mid Gain -15.0–0 .0–15.0dB
Hi-Mid Freq 20Hz–2 .00kHz–20.0kHz
Hi-Mid Q
0.5–1 .0–16.0
Lo-Mid Gain -15.0–0 .0–15.0dB
Lo-Mid Freq 20Hz–500Hz–20.0kHz
Lo-Mid Q 0.5–1 .0–16.0
Lo Gain -12.0–0 .0–12.0dB
Lo Freq 20Hz–100Hz–2.00kHz
Compressor/Limiter
OFF, ON
Selects the compressor or limiter.
Compressor
Type
Limiter
Compressor
Threshold
-50–-8–0dB
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1,
Ratio
3.20: 1, 4.00: 1, 5.60: 1, 8.00: 1,
16.0: 1, INF: 1
Attack 0.0–30–100ms
Release
30–250–5000ms
Makeup Gain -40–0–40dB
Limiter
Explanation
Adjusts the output volume.
This can also be adjusted by the [AUX 1] knob.
Turns the mute function on/off. When this is "ON", the input audio is temporarily silenced.
Turns the solo function on/off. Only the audio for which this is "ON" is heard in the
headphones.
* The solo function applies to the headphone output. It does not affect output other than
the headphones.
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
Adjusts the return level of the reverb.
Adjusts the amount of audio sent to the AUX bus for each audio input.
Dry:
Sends the source audio with no effects applied.
Pre Fader:
Sends the effect-applied audio.
The send volume is constant, regardless of the volume (Input Level).
Post Fader:
Sends the effect-applied audio.
The send volume can be changed by adjusting the volume (Input Level).
Turns the equalizer on/off.
This is a 4-band parametric equalizer. It lets you shape the character of the sound by boosting
Effect
or cutting four frequency regions.
Boosts or attenuates the high band.
Adjusts the center frequency when changing the tone quality in the high band.
Boosts or attenuates the high-midrange band.
Adjusts the center frequency when changing the tone quality in the high-midrange band.
Adjusts the width of the frequency band when boosting or attenuating high-midrange
band.
Boosts or attenuates the low-midrange band.
Adjusts the center frequency when changing the tone quality in the low-midrange band.
Adjusts the width of the frequency band when boosting or attenuating low-midrange band.
Boosts or attenuates the low band.
Adjusts the center frequency when changing the tone quality in the low band.
Turns the compressor or limiter on/off.
Audio that exceeds the specified threshold level is compressed. This reduces the difference
Effect
between the maximum volume and minimum volume, making the audio more comfortable
for listening
Effect Compresses the audio so that the mixed audio does not exceed the specified threshold level.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
Specifies the level used as the threshold at which the compressor is applied. Compression is
applied to audio that exceeds the threshold.
2 .50: 1,
Specifies the degree of compression applied to the audio. The state in which no compression
is applied is defined as "1".
Specifies the time until compression starts when audio exceeding the threshold is input.
Adjusts the length of time until compression ends after audio falls below the threshold.
Adjusts the final output volume level after applying the compressor.
Menu List
127