21: Ctl/Exp - Roland VR-120HD Reference Manual

Menu List

21: Ctl/Exp

Value
(bold text: default
Menu item
value)
Ctl/Exp 1, 2
These settings for the footswitch or expression pedal connected to the CTL/EXP 1, 2 jacks.
Settings for the devices (footswitch or expression pedal) connected to the CTL/EXP 1, 2 jacks.
Off
Ctl/Exp Type
Ctl A & Ctl B
Exp
When Ctl/Exp Type = Ctl A & Ctl B
Assign Specifies the functions that are assigned to Ctl A and Ctl B of the footswitch.
Ctl A
Category
Ctl B
N/A
PGM Channel Select
PST Channel Select
AUX Channel Select
Input 1–8 Assign
Still Output
PinP & Key 1–4 Source
DSK 1, 2 Source
Button Control
Audio Input Mute
Audio Output Mute
Audio Input Solo
Audio Output Solo
Voice Changer
Auto Switching
Reverb (Momentary)
Reverb (Alternate)
Output Fade
Load Memory
Input Scan
Scene Memory Scan
Macro Execute
Sequencer
GPO (One Shot)
GPO (Alternate)
138
Explanation
Disables the CTL/EXP jack.
Choose this if a footswitch is connected.
Choose this if an expression pedal is connected.
Explanation
Value
–– No function is assigned.
Input 1–8 Switches the video sent to the PGM bus.
Input 1–8 Switches the video sent to the PST bus.
Input 1–8 Switches the video sent to the AUX bus.
HDMI 1–6, SDI 1–6, Still 1–16 Changes the video assigned to Input 1–8.
Pauses the normal output, and previews or final outputs a cut of the still
Still 1–16
image. Press the footswitch again to return to normal output.
HDMI 1–6, SDI 1–6, Still 1–16 Switches the video source of the inset screen.
HDMI 1–6, SDI 1–6, Still 1–16 Switches the DSK video source.
CUT Button, AUTO Button
MIX Button
WIPE Button
SPLIT 1 Button
SPLIT 2 Button
PinP & Key 1–4 PVW Button
This works the same as when you press the button selected in "VALUE".
PinP & Key 1–4 PGM Button
DSK 1, 2 PVW Button
DSK 1, 2 PGM Button
USER 1–4 Button
AUDIO EFFECT 1–4 Button
AUDIO PLAYER 1–8 Button
Audio In 1–9/10, USB In,
Bluetooth In, HDMI 1–6, SDI Turns the mute function on/off for the input audio.
1–6, Video Player
Main Bus, AUX 1 Bus, AUX 2
Turns the mute function on/off for the output audio.
Bus, USB Out, Stream/Record
Audio In 1–9/10, USB In,
Bluetooth In, HDMI 1–6, SDI Turns the solo function on/off for the input audio.
1–6, Video Player
Main Bus, AUX 1 Bus, AUX 2
Turns the solo function on/off for the output audio.
Bus
Audio In 1, 2 Turns the voice changer on/off.
–– Turns the auto switching function on/off.
–– Reverb turns on only while you press the footswitch.
–– Turns reverb on/off.
–– The final output video fades in/out.
Memory 1–32 Recalls a scene memory.
Each time you press the footswitch, the final output switches from Input
Normal
1–8 in sequential order.
Each time you press the footswitch, the final output switches from Input
Reverse
1–8 in reverse order.
Each time you press the footswitch, scene memories 1–32 are recalled in
Normal
sequential order.
Each time you press the footswitch, scene memories are recalled in
Reverse
reverse order from 32 through 1.
Macro 1–100 Executes a macro (a series of recorded operations).
Mode On/Off, Next, Previous, When the sequencer function is on, this works the same as when you
Auto Sequence press the button selected in "VALUE".
GPO 1–16 Outputs a control signal for 0.5 seconds.
The control signal output is switched on/off with each press of the
GPO 1–16
footswitch.