KRAUSE & BECKER 62915 Owner's Manual & Safety Instructions page 17

if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.
7. After fluid in Priming Tube is clear,
switch Power to OFF.
8. Turn to Spray mode and switch power to ON.
9. Spray paint into paint pail.
10. Change to waste bucket as paint thins.
Item 62915
RETURNS NOT ACCEPTED & WARRANTY VOID
OFF
ON
For technical questions, please call 1-888-866-5797.
11. Turn to Prime mode.
12. Continue to flush until clear.
13. Release trigger, turn power OFF and turn Prime/
Spray switch to Prime mode to relieve pressure.
14. Unscrew nut from housing, it is
behind the swivel connector.
OFF
Page 17