Setup - KRAUSE & BECKER 62915 Owner's Manual & Safety Instructions

if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.
Set Up
Note: Remove or cover objects that you want
to protect from overspray (paint mist).
1. Attach Paint Hose to Paint Hose Outlet
and tighten with wrench.
2. Attach Paint Hose to Paint Gun and
tighten with two wrenches.
Page 10
RETURNS NOT ACCEPTED & WARRANTY VOID
For technical questions, please call 1-888-866-5797.
3. Turn Pressure Control Knob to
Low Pressure Spray setting.
Item 62915