Paradyne HotWire 5446 Installation Instructions Manual page 9

2. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the
cable into the jack labeled ETHERNET.
Use a straight-through cable and connect the other end to an Ethernet hub, or
Use an Ethernet crossover cable and connect the other end to a PC with an
Ethernet Network Interface Card (NIC).
PC with Ethernet
Network Interface
Card
For RTU cable pin assignments, refer to
HotWire RTU
Ethernet
Crossover
Cable
Cables & Connectors
9
Ethernet
Line
97-15303a
, page 14.