Chapter 1: Starting A Ccm Client Session; Before You Start - Nortel Configuration Manager Configuration

Chapter 1
Starting a CCM client session
Once you or the Contivity Configuration Manager (CCM) administrator starts the
CCM server software, you can gain access to it in one of two ways. You can
access it with either the CCM standalone client or the CCM client applet that runs
in a Web browser.
Information in this chapter is organized as follows:
•
•
•
•
•
•
•

Before you start

Before you start a CCM client session, obtain the following information:
•
•
"Before you start" on page 23
"Starting the standalone client" on page 24
"Starting the Web client" on page 27
"Connecting to the CCM server from the Web client" on page 28
"Connecting to the CCM server from the standalone client" on page 29
"Resetting a CCM client session" on page 30
"Ending a CCM client session" on page 30
The location of the CCM server software.
If you are using the Web client, you need the URL for the server software; if
you are using the standalone client software, you need the name of the host
and the port on which the server software is installed.
Your CCM user ID and password.
If you do not have a valid user ID and password, you will not be able to start a
client session.
Contivity Configuration Manager 2.2 User Guide
23