Nortel CallPilot Mini Installation Manual page 5

Entering the Software Keycodes on a Business Communications Manager
To enter the Software Keycode:
1. Log on to Unified Manager.
2. Click the System key and then click the Licensing key.
3. On the Configuration menu, click Add a Keycode.
4. In the Keycode box, enter the 24-digit Software Keycode number.
Note: Make sure you enter a hyphen between each eight-digit segment.
5. Click the Save button.
After the Software Keycode is accepted and enabled, a confirmation box
appears.
6. Click the OK button.
Entering Software Keycode Files on a Business Communications Manager
If you have a Business Communications Manager system, you can load Software
Keycodes by loading the Software Keycode file into your system.
To load the Software Keycode file:
1. Log on to Unified Manager.
2. Click the System key and then click the Licensing key.
3. Click Keycode Files heading.
The Keycode File Location Information window appears.
4. In the Keycode File Location Information window, enter the information
required to access the computer and folder where the Software Keycode file
downloaded from the Nortel Networks Keycode Retrieval System is stored.
Note: The Software Keycode file must be stored in a shared folder.
5. On the Configuration menu, click Apply New Keycode File.
6. Click the Yes button.
After the Keycode File is accepted, a confirmation box appears.
7. Click the OK button.
PO909884 Issue 03
Software Keycode Installation Guide 5
Software Keycode Installation Guide