djpower djV PRO STAGE EFFECTS DC-1 User Manual

djpower djV PRO STAGE EFFECTS DC-1 User Manual

C02 confetti blaster

Advertisement

Quick Links

DC-1
CO2 CONFETTI BLASTER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the djV PRO STAGE EFFECTS DC-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for djpower djV PRO STAGE EFFECTS DC-1

  • Page 1 DC-1 CO2 CONFETTI BLASTER...
  • Page 2: Before You Begin

    Always use approved CO2 cylinders, hoses and connections. Always consult your CO2 supplier for regulations and instructions on safe installation and use. DJPOWER is not liable for unsafe situations, accidents and damage that are the result of incorrect working with CO2 gas and CO2 cylinders.
  • Page 3: Mounting And Rigging

    1.5.2 Personal Safety • Always connect the product to a grounded circuit to avoid the risk of electrocution. • Never aim or fire the output at any person or living thing. • Make sure that children, unauthorised people and animals do not obtain access to the machine. 1.5.3 Mounting and Rigging •...
  • Page 4: Product Overview

    DC-1 is a special effects machine that launches confetti into the air up to a height of 12-15 meters. The DJPOWER CO2 Confetti Blaster is equipped with a CO2 powered woofer. CO2 is shot into the woofer through small holes. This creates a Venturi effect that draws the confetti continuously from the hopper, out of the woofer and into the air.
  • Page 5: Product Dimensions

    Product Dimensions 560 mm 450 mm TECHNICAL SPECIFICATIONS AC Power Input Voltage & Rate 220-240 V, 50/60 Hz Fuse (F) Current Limiter Type Current Limiter Specifications 2 A, 250 V 80 W Total Power Consumption Typical Current 0.3 A Lockable PowerCon Power Input Connector Power Output Connector (Daisy Chained) Lockable PowerCon...
  • Page 6: Power Plug

    SETUP AC Power The machine has a fixed voltage power supply and can work with an input voltage of AC 220 V-240 V, 50/60 Hz, depending on the specific model. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
  • Page 7: Operation

    4.6.2 Rigging DJPOWER recommends using the following general guidelines when mounting this product. • Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes.
  • Page 8: Dmx Mode & Operation

    On-device Control Panel Button Function ▲ Increases the numeric value of DMX ▼ Decreases the numeric value of DMX On-device Control Mode & Operation 5.3.1 Programming • Slowly open the valve of the cylinder, you will see the wonderful effect while turn the switch to ON. •...
  • Page 9: Technical Information

    • DJPOWER® DC-1 DMX uses only 1 DMX channels, which defines the highest configurable address to 512. TECHNICAL INFORMATION Maintenance • To achieve the maximum service life of the machine, you must regularly clean the machine and test if it is functioning correctly.

Table of Contents