Advertisement
FAQs and Troubleshooting Guide (Cont.)
Table 4
Problem
Dishes are
not dried.
30 30
(AU) 1300 886 649 (NZ) 0800 836 761 |
Troubleshooting guide
Possible cause
Improper loading
Too little rinse aid
No rinse aid
Dishes are removed too
soon after the program
has finished.
Wrong program selection
Use of cutlery with a
lower-quality coating
After Sales Support
Solution
Load the dishwasher as suggested in
this manual.
Increase the amount of rinse aid.
Remove the cap from the rinse aid
dispenser and set the dosage dial to a
higher number.
Refill the rinse aid dispenser.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can escape. Wait at least 15 minutes
before unloading. Only start unloading
the dishwasher when the dishes are
barely warm to the touch. Empty the
lower basket first to prevent water from
dropping off dishes in the upper basket
onto the dry dishes in the lower basket.
In shorter programs the rinse
temperature is generally lower. This also
lowers the drying performance. Choose
a longer program with a higher rinse
temperature.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in the
dishwasher.
tempo.org/support
Hide quick links:
Advertisement
