Advertisement
Instructions (Cont.)
Filling the rinse aid and adjusting the settings
•
To fill the rinse aid compartment, open the rinse-aid compartment cap (Fig. 10).
•
Fill the compartment with rinse aid to the MAX level (Fig. 11) and then close the
cap.
•
Be careful not to overfill the rinse aid compartment and wipe up any spills.
Clean up any rinse aid spilled while filling with an absorbent cloth or paper towel to
Do not forget to replace the cap before you close the dishwasher door.
When to refill the rinse aid dispenser
Fill the rinse aid dispenser when the warning light [
on.
Adjusting the rinse aid dose
In order to change the rinse aid level, follow the below steps before turning on the
machine:
•
Open the door of the machine.
Turn on the machine, and press the PROGRAM button as soon as the machine is
•
turned on.
Hold down the PROGRAM button until "rA" disappears.
•
•
The factory setting is 4 (see the table below) - the machine will display the last set
dose level. Change the level by pressing the PROGRAM button repeatedly.
•
Turn off the machine to save the setting.
•
If the dishes are not drying properly or are spotted, increase the level. If blue
stains form on your dishes, decrease the level.
18 18
(AU) 1300 886 649 (NZ) 0800 836 761 |
CAUTION!
avoid excessive foaming during the next wash.
Fig. 10
After Sales Support
Fig. 11
] on the control panel comes
tempo.org/support
Hide quick links:
Advertisement
