Download Print this page

Device Reset; Brooklyn Reset - Solid State Logic SB 32.24 User Manual

Network i/o

Hide thumbs Also See for SB 32.24:

Table of Contents

SB 32.24 and SB 16.12 User Guide

Device Reset

Performing a device reset will clear the SSL device settings. This includes ownership states and input

settings. This does not clear Dante Brooklyn card settings.

Resetting the Dante Brooklyn card to default settings is performed from Dante Controller. Under the

Device Config tab for a device select Clear Config. This clears the device name, channel labels, IP

address settings, sample rate, latency and existing audio routes. This does not clear SSL Ownership

settings.

Table of Contents

Do you have a question about the SB 32.24 and is the answer not in the manual?

Sb 16.12