CONFIRMATION OF INDOOR UNIT
NOTICE
Electric auxiliary heating wiring diagram packed with the accessories.
If branch circuit wire lenght exceeds 100 ft, consult NEC 210-19a to determine maximum wire length.
Use 2% voltage drop.
After the electric heating wiring is connected, please confirm before power on:
•
Check all wiring and ensure secure connection of all wiring.
•
Ensure that wire size is properly selected per NEC or local codes.
Specifications
circuit breakers
Units without electrical heat
UNIT
VOITS-PHASE
SIZE
Use copper wire only to connect unit. If other than uncoated (non-plated) 75°C copper wire (solid wire
for 10 AWG and smaller, stranded wire for larger than 10 AWG) is used consult applicable tables of the
National Electric Code (ANSI/NFPA 70).
NOTICE
The specification may be different between different models ,please refer to indoor unit ' s nameplate.
Number of
Number of relays
Rated
MIN CKT AMPS
current(A)
Installation and Operation Manual - VCDxxSA
Number of power
cord groups
MIN WIRE SIZE
AWG*
23
23
Number of power cord
grounding screws
BRANCH CIRCUIT
FUSE/CKT
BKR AMPS
#
#
#
#
#