Safety; Safety Advice Within This Manual - qubev EVON0040 Installation & Operation Manual

Universal electric vehicle chargepoints
Hide thumbs Also See for EVON0040:
Table of Contents

Advertisement

Safety

Safety
This manual is provided as a guide to installation and operation and is specifically applicable to
the QubEV electric vehicle charger. Failure to install and operate the QubEV in accordance with
these instructions may damage the unit and invalidate the manufacturer's warranty.
IMPORTANT: Installers and End Users must read and understand the content of
this manual before installation and/or use of the product.
Installation must only be performed by someone who is properly qualified and competent to do
so in accordance with the current legislation in force in the geographical location of the
installation.
The manufacturer/distributor cannot accept any responsibility for improper installation or
any problems arising from improper installation.
NOTE: Damage to the equipment, connected systems or to property caused by improper
installation are the responsibility of the installer.
The information provided in this manual must ONLY be used with the model(s) listed on page
1 of this manual.
The information provided in this manual must NOT be used with any other product.
The content of this manual may be updated by the manufacturer as required.
Do NOT use the equipment for anything other than its intended purpose.
Do NOT modify the equipment unless specifically instructed to do so by the manufacturer.
Do NOT attempt to repair the equipment unless specifically instructed to do so by the
manufacturer.
To maintain electrical safety, the body enclosure of the product (access covers) must be
secured in their correct location using the supplied fasteners and the seal must be sufficient
to maintain the IP rating of the enclosure.
Fasteners used to mount the product in its working location must be sufficient for the task
and the specific mounting point.
If required, fasteners used to mount the product in its working location should be sealed to
maintain the IP rating of the enclosure.
Damage to the product may render it unsafe. The product must be electrically isolated and
NOT used until appropriate remedial action has been performed.

Safety Advice within this Manual

This manual uses a system of warnings, cautions and notes.
WARNINGS concern the safety of installers/end user and will be given before the
detail/instructions in the manual.
CAUTIONS concern the potential for damage to the equipment and will be given before the
detail/instructions in the manual.
NOTES are given to provide additional information and/or to highlight information of
importance. They will be given either before or after the detail/instructions as appropriate
and may use different wording (such as IMPORTANT) where emphasis is required.
Warnings, Cautions and Notes may be repeated several times as appropriate and may be
preceded by a hazard symbol where appropriate.
Universal Electric Vehicle Chargepoints
Page 3 of 17
QUBEVM-V01-R0 Installation and Operation Manual
February 2023

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evon0080

Table of Contents