Table of Contents
Advertisement
Quick Links
UNIVERSAL ELECTRIC
VEHICLE CHARGER
7.2kW Universal Charging Socket
Up to
SIMPLE
•
COMPACT
•
AFFORDABLE
Model No.
EVON0010
EVON0040
INSTALLATION & USER GUIDE
Thank you for choosing to charge with
. Inside you
QUBEV
will find some useful hints and tips as we want your experience
with the
to be as smooth as possible!
QUBEV
REF: QUBEV-UG-02
Advertisement
Table of Contents
Related Manuals for qubev EVON0010
Summary of Contents for qubev EVON0010
- Page 1 Up to SIMPLE • COMPACT • AFFORDABLE Model No. EVON0010 EVON0040 INSTALLATION & USER GUIDE Thank you for choosing to charge with . Inside you QUBEV will find some useful hints and tips as we want your experience with the...
- Page 2 November 2020 QubEV are the publishers of this document and own the rights to use the text, images and all technical content contained within. Content supplied by third parties / partner organisations remains the property of that organisation and is used by agreement with the supplier.
-
Page 3: Table Of Contents
For assistance with the installation or operation of this product, contact Technical Support. Please have the details of the product available so we can attend to your query appropriately: www.qubev.co.uk QUBEV-UG-02 Installation and Operation Manual QubEV September 2020 Page 3 of 15... -
Page 4: Safety
This manual is specifically applicable to the QubEV electric vehicle charging product and is provided as a guide to its installation and operation. Failure to install and operate the QubEV in accordance with these instructions may damage the unit and invalidate the manufacturer’s warranty. -
Page 5: Safety Advice Within This Manual
150mm x 200mm x 100mm (W x H x D) Materials ABS (UL94 HB Fire Rated), IK08 Mass <2.0kg Operating Temperature -20°C to +50°C Protection IP65 - Enclosure, IP54 - Socket Figure 1 General Arrangement and Dimensions QUBEV-UG-02 Installation and Operation Manual QubEV September 2020 Page 5 of 15... -
Page 6: Electrical Specification
Unpacking Electrical Specification EVON0010 EVON0040 Description QUBEV Universal Socket EV Charging QUBEV Universal Socket EV Charging Unit Unit Rated Output Up to 7.2kW (32A) Rated Current Up to 32A max AC Overload Protection 1x C40A MCB AC & DC Fault Protection... -
Page 7: Typical Options
Further detail is provided in the Installation procedure. 6. Make sure the supplied fixings are suitable for the mounting location. If not suitable, alternatives must be obtained locally before proceeding with the installation. QUBEV-UG-02 Installation and Operation Manual QubEV September 2020... -
Page 8: Labelling
Installers must observe any/all warning labels displayed on the equipment or inside the equipment enclosure. Figure 2 Product Label Schematics EARTH IN ACCORDANCE WITH CURRENT REGULATIONS Figure 3 EVON0010 - Schematic Diagram QubEV QUBEV-UG-02 Installation and Operation Manual Page 8 of 15 November 2020... - Page 9 Installation Figure 4 EVON0040 - Schematic Diagram QUBEV-UG-02 Installation and Operation Manual QubEV September 2020 Page 9 of 15...
-
Page 10: Installation Procedure
5. Remove the fixing template from the packaging. 6. Use the fixing template to mark the mounting position. Offer the QubEV fixing template up onto a flat and smooth surface. Make sure it is orientated correctly and is level. Mark the 4 fixing holes onto the surface. -
Page 11: Commissioning
Make sure it is safe to apply electrical power to the charger. Set the Charger Power By default the QubEV charger is set to 32 Amps. If a lower power is required, refer to the steps below: 1. Carefully remove the cover of the Charge Control Unit and locate the Amp Setting ‘DIP’... -
Page 12: Amp Setting Record
2. Make sure you are satisfied that the installation is complete and is in a safe condition. 3. Refit the front panel, taking care not to trap any electrical cables. Secure the panel with the fixings removed earlier in the process. QubEV QUBEV-UG-02 Installation and Operation Manual Page 12 of 15 November 2020... -
Page 13: After Installation
2. Insert the cable into the vehicle first and then into the QubEV charger socket. 3. The Charge Status Indicator will illuminate Steady Green when charging is in progress. 4. To STOP charging, unplug the cable from the vehicle, and then from the QubEV charger. QUBEV-UG-02 Installation and Operation Manual... -
Page 14: Maintenance
Ensure you return your used device to your dealer or obtain information regarding a local, authorised collection and disposal system. Failure to comply with this EU Directive may result in a negative impact on the environment. QubEV QUBEV-UG-02 Installation and Operation Manual Page 14 of 15 November 2020... -
Page 15: Warranty
UK address. Should the return address be outside of the UK return postage will be at QubEV’s discretion. If the unit is found not to be defective return postage will need to be paid for by the customer. - Page 16 SIMPLE • COMPACT • AFFORDABLE British by Design Images are for marketing purposes only and are not contractual.