Related Manuals for qubev EVON0040
Summary of Contents for qubev EVON0040
- Page 1 INSTALLATION & OPERATION MANUAL SIMPLE • COMPACT • AFFORDABLE Universal Electric Vehicle Chargepoints 7.4kW or 22kW Models...
- Page 2 Number February Ver 1, Rev 0 New Document. 2023 Product: Universal Electric Vehicle Chargepoints Single-Phase Three-Phase Applicable Models: EVON0040 EVON0080 Installation and Operation Manual Document Type: QUBEVM-V01-R0 Document Code: UK English (Original) Language: February 2023 Date Published: One Stop Europe AB are the publishers of this document and own the rights to use the text, images and all technical content contained within.
-
Page 3: Table Of Contents
Support For assistance with the installation or operation of this product, contact your preferred electrical installer. Translations of this manual are available online from: www.qubev.com/downloads QUBEVM-V01-R0 Installation and Operation Manual Universal Electric Vehicle Chargepoints February 2023 Page 2 of 17... -
Page 4: Safety
This manual is provided as a guide to installation and operation and is specifically applicable to the QubEV electric vehicle charger. Failure to install and operate the QubEV in accordance with these instructions may damage the unit and invalidate the manufacturer’s warranty. -
Page 5: Product Specification
ABS (UL94 HB Fire Rated), IK08 Mass <2.0kg Operating Temperature -20°C to +50°C Protection IP65 - Enclosure, IP54 - Socket Figure 1 EVON0040 1-Phase Model Figure 2 EVON0080 3-Phase Model QUBEVM-V01-R0 Installation and Operation Manual Universal Electric Vehicle Chargepoints February 2023 Page 4 of 17... - Page 6 Product Specification DC Device Charge Controller Incoming Power Power Amps Terminals Selector (3-phase terminals shown) shown) Contactor Cables to Socket Figure 3 General Arrangement NOTE: The internal layout of components for the 1-phase and 3-phase models are almost identical, with the exception of the number of terminals for incoming power. Universal Electric Vehicle Chargepoints QUBEVM-V01-R0 Installation and Operation Manual Page 5 of 17...
-
Page 7: Electrical Specification
Product Specification Electrical Specification EVON0040 EVON0080 Description QUBEV Universal Socket EV Charging Unit Rated Output Up to 7.4kW (32A) Up to 22kW (32A) Rated Current Up to 32A max DC Fault Protection 6 mA DC Fault Protection Charging Current Variable – 10A, 16A, 20A, 25A & 32A... -
Page 8: Labelling
Unpacking Labelling Observe any/all warning labels displayed on or inside the equipment enclosure. Figure 5 Typical Serial Number Label Includes Month and Year of Manufacture Figure 4 Typical Product Label Unpacking The content of the package depends on any options or accessories that may have been selected. IMPORTANT: Make sure all packaging is disposed of responsibly and in accordance with the current regulations in your region. -
Page 9: Installation
Installation Installation IMPORTANT: Installers and End Users must read and understand the content of this manual before installation and/or use of the product. Installation must only be performed by someone who is properly qualified and competent to do so in accordance with the current legislation in force in the geographical location of the installation. -
Page 10: Schematic Diagrams
Ue: 400V 9kW~230V AC-7a 3kW~230V AC-7b IEC/EN 61095 IEC/EN 60947-4-1 RFID EARTH IN ACCORDANCE WITH CURRENT REGULATIONS Figure 6 EVON0040 - Schematic Diagram (1-Phase Model) Universal Electric Vehicle Chargepoints QUBEVM-V01-R0 Installation and Operation Manual Page 9 of 17 February 2023... - Page 11 Installation 7(13) Ready Charge 1 3 5 7(13) Fault 240V~ 6 8(14) Ie(AC-7a) Ui:500V Ue:400V 40kW/3~400V AC-7a 15kW/3~400V AC-7b IEC/EN 61095 IEC/EN 60947-4-1 8(14) RFID EARTH IN ACCORDANCE WITH CURRENT REGULATIONS Figure 7 EVON0080 - Schematic Diagram (3-Phase Model) QUBEVM-V01-R0 Installation and Operation Manual Universal Electric Vehicle Chargepoints February 2023 Page 10 of 17...
-
Page 12: Installation Procedure
At the end of the procedure, make sure all connections are secure before refitting the panel. 4. Visually inspect the QubEV and internal components. Any components that may have come away from the DIN rail in transit must be refitted to the rail if there is no damage to the component or its securing mechanism. - Page 13 Installation NOTE: All electrical work must be performed in accordance with the current Electrical Wiring Regulations. CAUTION: Equipment Damage – Sensitive Equipment If you will be performing insulation resistance tests on the power supply cables, it is advised to be done BEFORE connecting the cable to the charger. The high voltages applied during the test may damage sensitive components if tested after the cable is connected.
-
Page 14: Commissioning
Incorrect setting may lead to equipment damage and/or personal injury. The current rating must not exceed the rating of the electrical supply. By default, the QubEV charger is set to 32 Amps. If a lower power is required, refer to the steps below: 1. -
Page 15: After Installation
4. To manually STOP charging, unplug the cable from the vehicle, and then from the QubEV charger. -
Page 16: Maintenance
Maintenance Maintenance NOTE: In the event of a hardware issue, always contact your installer first. Damage caused to the equipment by misuse, lack of maintenance, inappropriate maintenance or modification is not covered by the manufacturer warranty. WARNING: Electrical Power The charger enclosure does NOT need to be opened for routine maintenance tasks but, if opened for more thorough testing/maintenance, it must only be done by an appropriately qualified electrical engineer. -
Page 17: Fault Diagnosis
Disposal Fault Diagnosis In the event of a fault, the Charging Indicator on the front of the charger may show the type of problem. Controller LED Colour LED State Remark State BLUE 1Hz Flashing Ready No Fault BLUE Stable Connected No fault GREEN Brightening/Glowing... -
Page 18: Warranty
QubEV will return your repaired/replaced unit free-of-charge to any UK address. Should the QubEV may provide a prepaid label at its discretion, otherwise the customer should return address be outside of the UK return return the product at their own cost. - Page 20 THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. The latest version of this publication can be downloaded at http://qubev.com Illustrations of the product and user interface are for marketing purposes only. Brand names, logos and trademarks used herein remain the property of their respective owners.