Horizon Fitness T101 Owner's Manual page 12

ASSEMBLY STEP 2
PART TYPE
A BOLT
2
12
HARDWARE FOR STEP 2
DESCRIPTION
M8X1.25PX60L-30L
3
4
A
3
2.1 Open HARDWARE FOR STEP 2.
QTY
2.2 Attach LEAD WIRE to bottom end of CONSOLE
3
CABLE (3). Pull LEAD WIRE through RIGHT
CONSOLE MAST (4). After pulling the lead wire
through the mast, the top of the CONSOLE
CABLE (3) should be located at the top of the
mast.
2.3 Attach RIGHT CONSOLE MAST (4)
to MAIN FRAME (2) using 3 BOLTS (A).
NOTE: Be careful not to pinch any wires
while assembling the console.
NOTE: Do not fully tighten bolts until the end
of STEP 3.
3
A