Carrier 38MGRBQ18B-3 Service Manual page 86

38MGRBQ: Service Manual
FAN ASSEMBLY
2
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
7. Remove the screws of water collector, and remove the
water collector. (3 screws)
8. Remove the terminal board's two screws and the right side
panel's 9 screws.
9. Remove the right side panel.
REMOVE THE FAN ASSEMBLY
1. Remove the top cover, right side panel and front panel
from section 1, steps 1-9.
2. Remove the hex nut fixing the fan.
3. Remove the fan.
4. Loosen the 4 screws.
5. Remove the fan motor.
86
Water Collector screws
Terminal
board
screws
Right side
board
screws