Table of Contents
Advertisement
—————————— INTRODUCTION ——————————
This manual provides operation, maintenance, assembly and
parts identification for your new backhoe.
Your CASE IH BHX1102 backhoe is designed for use on
CASE IH D25, DX25, D29, DX29,D33, DX33, D35, DX35,
D40, DX40, D45, DX45, DX48, and DX55 tractors.
Successful operation and long life of your backhoe depends,
of course, on proper operation and the care given it. Please
read this manual carefully and follow all instructions. Correct
operation and maintenance will save much time and expense.
This SAFETY ALERT SYMBOL identifies
IMPORTANT SAFETY MESSAGES in this
manual. OBSERVE and FOLLOW all
SAFETY MESSAGES to prevent personal
INJURY.
Reference to left and right used in this manual refer to the
position when seated in the operating position on the
backhoe, unless otherwise specified.
If at any time you have a service problem with your backhoe,
or need parts, contact your local CASE IH equipment dealer.
4
Your dealer will need your backhoe model, serial number and
component number* to give you prompt efficient service.
Record your serial and component numbers below. Also
record date of purchase.
®
Model Number
BHX1102
Product Identification Number
* Your backhoe serial and component numbers are stamped
on this plate located on right side of main frame.
DATE PURCHASED
CNH America LLC
RACINE, WI 53404 U.S.A.
Made in U.S.A.
Serial Plate Location
F-3546-3-04
Advertisement
Table of Contents
