Drainpipe And Drain Hose Installation - Samsung AM FN1DEH Series Installation Manual

Drain pipe and Drain Hose Installation
Care must be taken when installing the drainpipe and drain hose for the indoor unit so
that condensate water is drained correctly outside.
Fix the flexible hose to the drainpipe.
1
AMFN1DEH/AMHN1DEH/AMJN1DEH/
AMFN2DEH
 The connection port of the flexible hose and PVC drainpipe must be fixed
with PVC adhesives.
 Check out that the connected part doesn't leak.
 Drain pipe type :
- VP20
- VP25
AMFN4DEH/AMKN4FEH
 Push the supplied drain hose as far as possible over the drain socket.
 Tighten the metal clamp as shown in the picture.
 Wrap the supplied large sealing pad over the metal clamp and drain hose
to insulate and fix it with clamps.
 Insulate the complete drain piping inside the building (field supply).
If the drain hose cannot be sufficiently set on a slope, fit the hose with
drain raising piping (field supply).
 Push the drain hose up to insulation when connecting the drain hose to
drain socket.
2
Connect the flexible hose to the drain hose port.
 Make sure that a rubber ring is installed on the drain hose port.
 Drain hose port location differs depending on the unit types.
3
Install the drain pipe as shortly as possible.
 Give a slightly slant to the drainpipe for proper drainage of condensate
water.
 There must be no gap on the connected part so that the drainpipe is
not separated from the flexible hose.
4
Insulate the drainpipe, and then fix it as indicated.
Whole drainpipe should be insulated by 5t(or more) insulation to prevent

water condensation.
PVC Tube Joint +VP25
Flexible hose
VP20 (Drainpipe)
Metal clamp
Drain socket
Drain piping
Drain hose
A-A'
Large
sealing pad
Tighten the clamp to the maximum
until you can see eight holes.
Drain hose port
Insulation cover band
Insulation drainpipe
Insulation cover drain
Indoor
Unit
Band(Not supplied)
Drain
hose
port
Adhesives
Flexible
Band
Drainpipe
hose
Band
17