Configuring Your Telephone; Need Support - NetComm Tangerine NF20 Quick Start Manual

Configuring your Telephone

To configure your telephone, you will need to contact our Voice Team for your VoIP settings. Once you
have received your VoIP settings follow these easy steps listed below.
1. Open a web browser and type
2. At the login screen, type in 'admin' as your username and the password printed on the label on the
bottom of the NetComm NF20 Wi-Fi 6 and login.
3. Select 'Voice' from the menu on the left-hand side of the screen and select 'SIP Basic Setting'.
4. Tick the first 3 boxes 'Use SIP Proxy', 'Use SIP Outbound Proxy', 'Use SIP Registrar' and enter the
domain/proxy provided by our Voice team.
5. In the table enter the provided username in the 'authentication name', 'Cid Name' and 'Cid Number'
boxes.
6. In the table enter the provided password in the password box.
7. Click the 'Apply/Save' button to complete the setup.
8. Select 'VOIP Status' from the menu on the left-hand side of the screen and check underneath
'Registration Status' column it says 'Up' to ensure connection.

Need support?

For a more comprehensive user guide, you can view the NetComm User Guide here.
Alternatively, for Customer Service and troubleshooting, contact our team on
NetComm NF20 Wi-Fi 6 Quick Start Guide
https://192.168.20.1/ into the address bar, then press Enter.
1800 211 112.
tangerinetelecom.com.au
10