Table of Contents
Advertisement
3 Functions and features
The DTE820 RFID UHF sensor integrates a mid-range RFID UHF antenna and an
RFID UHF reader to process the antenna signals� The device is suited for reading
and writing active and passive RFID tags in the frequency range of 865 - 868 MHz�
The DTE820 has a PoE Ethernet interface and a serial interface� In addition digital
inputs and outputs (GPIO) are available� The device can be supplied with voltage
either via PoE or locally�
On delivery the device can read and write tags according to the EPC Gen2
standard� Other protocols can be uploaded via software updates�
Knowledge of the EPCglobal GS1 standard is necessary for the configuration of
the DTE820� In this standard the function of the interface between tag and reader
is described� Further information at: www�epcglobalinc�org�
The DTE820 can be controlled and evaluated in various ways:
● Software ReaderStart
● Supplied DLL
● Access to the reader protocol
4 Items supplied
● DTE820 RFID UHF sensor
● CD with demo software, example programming, DLL and documentation
5 Accessories
The following accessories are available for the DTE820: If you have any questions
about the accessories, please contact our sales team�
● Connection cable for Ethernet and current connection (PoE), article no� E11898
● Mast and wall fixture, article no� E80340 for mounting RFID antennas,
DTE readers and sensors (up to a total weight of 6�0 kg)�
● Connection cable for GPIO and RS-232 connection, 12 poles,
article no� for 1�5 m ZB0643, article no� for 5�0 m: ZB0656�
RFID UHF Sensor
UK
5
Advertisement
Table of Contents
