Testing Pto Switch - Ryobi RY48ZTR75 Service Manual

TESTING PTO SWITCH

1. Mower Power OFF
2. DMM set to measure Resistance
3. Insert DMM probes where indicated. When red button is
PULLED OUT, the switch is CLOSED (very LOW resistance or
continuity)
4. When red button is PUSHED IN, the switch is OPEN (very
HIGH resistance or no continuity)
Confidential & Proprietary – Property of Techtronic Power Equipment – DO NOT COPY or DISCLOSE
Note: Make sure spade plugs
are secure. They should be
locked in place and should
5
not come loose if the wires
v
are pulled on.
Note: these terminals
are not used