Ryobi RY48ZTR75 Service Manual page 19

SEPARATING CONNECTORS
Many of the connectors are sealed together with heat shrink tubing. To separate the connectors, soften the heat
shrink with a heat gun, then peel the heat shrink tubing off with pliers as shown.
Heat
Gun
Connector
Connector
When reassembling connectors, be sure to apply new heat shrink tubing and shrink with a heat gun to
protect against elements and hold the connections together.
Extra care is needed to avoid damaging surrounding parts by the heat. Be careful of the batteries.
Confidential & Proprietary – Property of Techtronic Power Equipment – DO NOT COPY or DISCLOSE