Ryobi RY48ZTR75 Service Manual page 16

MAIN FUSE
IMPORTANT: If the main fuse is blown, find
the source of problem before replacing fuse
Where probes go
Confidential & Proprietary – Property of Techtronic Power Equipment – DO NOT COPY or DISCLOSE
1.Disconnect main battery connection
2. Open the plastic box to access main fuse.
3. Set DMM to Resistance Ω symbol on DMM
• Measure were indicated to the left.
• Ensure the nuts are tight, but not
• overtightened, as this can cause the fuse
• to twist and break.
If fuse is blown,
Replace only with the same physical size and same
Amperage.