Cocraft GSW14T Quick Start Manual

1/4" Torque Wrench
Art.no 41-2679 Model GSW14T
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
If you experience any technical problems or have questions, please
contact our customer service team (address on the back).
Safety
• Always release the spring tension after use by setting the torque
wrench to its lowest torque setting.
• Never use the torque wrench to undo nuts, bolts or other fasteners
– exceeding the maximum torque limit whilst loosening a fastener
could damage the wrench and affect its accuracy for future use.
• Never continue tightening once the desired torque setting has
been reached.
• Never set the torque wrench to a setting higher or lower than
the working torque range of the wrench (5–25 Nm).
• The torque wrench should be treated as a precision instrument.
Handle it carefully and store it in a clean, dry place where there is
no risk of it sustaining damage.
Product description
1 2
3
2.25
0.00
0.25
1. Socket release button – depress
to attach/detach a socket/adapter/
extension bar.
2. Forward/Reverse switch to select clock­
wise or anticlockwise torque control.
3. Scale in Nm (Newton metres)
4. Locking ring – pull down to unlock
the handle.
5. Handle – twist to set the torque.
6. Minor scale
7. Major scale
8. Centre line
9. Top of the handle
UNITED KINGDOM • www.clasohlson.co.uk
Instructions for use
• Always refer to the manufacturer's recommended torque settings
and tightening sequences.
• Make sure that the threading on the fastener to be tightened is free
from dirt and other contaminates.
• Tighten the fastener in a smooth and continuous motion until
a click is heard and felt. At low torque settings, the click can be felt
less noticeably than at high torque settings. Test using the wrench
on both low and high torque settings to familiarise yourself with
the feel of the different clicks.
Example: Setting a torque of 5.75 Nm
N.m
22.5
17.5
12.5
7.5
Pull the locking ring (4) down
while twisting the handle. Twist
the handle until the top edge (9)
4 5
is in line with the 5 Nm mark on
the major scale (7). Make sure that
the 0.00 mark on the minor scale
(6) is in line with the centre line (8).
Note:
Always release the spring tension after use by setting the torque
8
wrench to its lowest torque setting.
25.0
22.5
20.0
Cleaning and care
7
17.5
15.0
12.5
10.0
7.5
5.0
Cleaning
9
Wipe the torque wrench clean using a clean dry cloth. Never immerse
6
the wrench in any kind of cleaning fluid, doing so will affect
the lubrication of the internal mechanism.
Calibration
In order to ensure the correct operation and accuracy of the torque
wrench, it should be calibrated regularly. We recommend that the wrench
is calibrated at least every 12 months or more frequently depending on
how often it is used.
N.m
25.0
22.5
20.0
25.0
17.5
15.0
20.0 12.5
10.0
15.0
7.5
5.0
10.0
5.0
Twist the handle three
graduations on the minor
scale until the centre line is
aligned with the 0.75 Nm
mark.
Responsible disposal
The product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
5−25 Nm
Working range
Accuracy 3 %
Square drive 1/4"
Length 235 mm
Conversion table
From To Multiply by
cNm in­lb
cNm ft­lb
cNm Nm
Nm in­lb
Nm ft­lb
Nm kg­cm
Nm kg­m
Nm cNm
kg­cm in­lb
kg­cm ft­lb
kg­cm Nm
kg­m in­lb
kg­m ft­lb
kg­m Nm
0.0885
0.00737
0.01
8.85074
0.73756
10.1972
0.10197
100
0.86796
0.07233
0.09806
86.7961
7.23301
9.80665