Table of Contents
Advertisement
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
RADIO
Selecting radio mode
Press the "PWR" button
or the "AM/FM" button to
switch on the radio.
Selecting the waveband
Press the "AM/FM" button
several times in succession
to select the waveband; it
changes in the following
order: FM1 / FM2 / FM3 /
MW / LW / FM1...
Automatic station search
Press the "SEEK
"SEEK
" button to search
the lower frequencies or
the
higher
respectively.
The search begins automatically and
Manual station search
Turn
respectively to the left to
search the lower frequencies
or to the right to search the
higher frequencies.
Manual station storing
waveband.
Storing a new station replaces the
previous station.
until an audible signal is heard.
" or
The sound cuts out then becomes
audible again when the station has
been stored.
frequencies
The number of the button and the
associated radio frequency appear on
the display.
To recall the pre-set memory setting,
press the button and release it within
two seconds.
Automatic station storing
the
"TUNE"
dial
Stations can only be stored automatically
on wavebands FM3, MW and LW.
Storing
previous stations.
This storing can be activated auto-
matically irrespective of the waveband
selected.
corresponding buttons.
Recalling stored stations
"6". The station corresponding to the
waveband selected appears on the
display.
Disconnecting the battery terminals
clears the stored radio stations.
new
stations
replaces
Press the "AM/FM" button
for more than two seconds.
the
XI
159
Advertisement
Table of Contents
