Table of Contents
Advertisement
P R A C T I C A L I N F O R M A T I O N
Removing the wheel
Parking the vehicle
Immobilise the vehicle where it does
vehicle on level, stable and non-
slippery ground.
Apply the handbrake, switch off the
the wheels.
If necessary, place a chock under
the wheel diagonally opposite the
wheel to be changed.
Never
go
underneath
raised using a jack; use a stand.
List of operations
Fit the anti-theft socket 5 on the
wheelbrace 1 to unlock the anti-theft
bolt.
Unlock the other bolts using the
wheelbrace 1 only.
Place the jack 2 in contact with one
of the two front A or rear B locations
provided on the underframe, whi-
chever is closest to the wheel to be
changed.
is in contact with the ground. Ensure
that the centreline of the jack base
plate is directly below the location A
or B used.
cient space between the wheel and
the ground to admit the spare (not
punctured) wheel easily.
Remove the bolts and store them in
a clean place.
a
vehicle
Remove the wheel.
2 until its base plate
IX
127
Advertisement
Table of Contents
