Table of Contents
Advertisement
Increasing the programmed
speed
Using button 3 "ACC RES" :
-
successive presses increase the
1 mph (1.6 km/h).
-
a maintained press of this button
increases the programmed speed
progressively.
Once the speed required has been
reached, release the button, the new
speed is stored.
Using the accelerator pedal:
-
accelerate to reach the speed re-
quired, then press button 2 "COAST
SET" . Release the button to store
the new speed.
Decreasing the programmed
speed
Using button 2 "COAST SET" :
-
successive presses decrease the
1 mph (1.6 km/h).
-
a maintained press of this button
decreases the speed progressively.
Once the speed required has been
reached, release the button, the new
speed is stored.
Using the brake pedal:
-
brake to deactivate the cruise con-
trol, then press button 2 "COAST
SET" . Release to store the new
speed.
D R I V I N G
Temporary acceleration/
deceleration
Temporary acceleration
Press the accelerator pedal as normal.
When the pedal is released, you return
to the stored speed.
Temporary deceleration
Press the brake pedal to reduce the
speed. To return to the stored speed,
press button 3 "ACC RES" .
Deactivating the function
To deactivate the cruise control:
Press the brake or clutch pedal, or
Press button 1 "ON OFF" , or
Press button 4 "CANCEL" .
The cruise control may be deactivated
automatically:
When the vehicle reaches a speed
below 20 mph (35 km/h).
When the active stability control
system (ASC) comes into operation.
Reactivating the function
When the cruise control has been
deactivated, you can return to the
stored speed by pressing button 3
"ACC RES" when you reach a mini-
mum speed of 25 mph (40 km/h).
When the cruise control is
in operation, pay attention if
you press and hold one of
the programmed speed adjustment
buttons: this can result in a very rapid
change in the speed of your vehicle.
Do not use the cruise control on
On a steep descent, the cruise control
will not be able to prevent the vehicle
speed.
To prevent the mat from becoming
caught under the pedals:
-
ensure that the mat is positioned
correctly,
VII
115
Advertisement
Table of Contents
