Table of Contents
Advertisement
-
a "-" steering wheel control 2 for se-
quential downward gear changes,
-
a "+" steering wheel control 3 for
sequential upward gear changes.
Gear lever positions
VII
N : neutral.
With your foot on the brake, select this
position to start.
R : reverse gear.
With the vehicle stationary, keep your
foot on the brake pedal and push the
gear lever upwards.
D : automated mode.
Move the lever downwards to select
this mode.
+/-: sequential mode with manual gear
changing.
110
D R I V I N G
Move the lever downwards, then to the
left to select this mode, then:
-
push forward to change up,
-
push rearward to change down.
Functions of the steering wheel
controls
+ : manual gear changing in sequential
mode.
Press behind the "+" steering wheel
control to change up.
- : manual gear changing in sequential
mode.
Press behind the "-" steering wheel
control to change down.
Moving off
Select position N .
while starting the engine.
Start the engine. "N" appears on the
instrument panel display.
reverse (position R ).
Release the handbrake.
Release the brake pedal then accelerate.
"D" or "1" or "R" appear on the
instrument panel display.
Stopping - Starting on a slope
Do not use the accelerator pedal to
immobilise the vehicle on a slope,
apply the handbrake instead.
When starting on a slope, accelerate
gradually while releasing the handbrake.
Switching to sequential mode
Once you have moved off, you can
switch to sequential mode by selecting
position +/-.
"D" disappears and the gears engaged
appear in succession on the instrument
panel display.
The gear change requests are only car-
ried out if the engine speed permits it.
D or +/-) or
Advertisement
Table of Contents
