Hyundai H-LCDVD906T Instruction Manual page 15

Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom
No sound Poor audio cable connection
Disc dirty or damaged
MUTE function is on
No image Poor video cable connection
Incorrect setting of your TV set
Disc cannot be Disc not inserted
read
Disc inserted incorrectly
Condensate on the unit laser
head
Remote control Remote control is incorrectly
does not directed at the unit
operate
Distance and angle to the unit
are too large
Run out batteries
Some functions Disc is recorded incorrectly
do not work
Incorrect key sequence
Static voltage on the unit
housing
Unstable image Incorrect TV settings
Cause
Make proper connection
Clean the disc
Disable MUTE function
Make proper connection
Correct the settings of your TV set
Insert the disc
Install the disc with the label side facing up
Switch the unit on without disc for an hour
Use the remote controller according to the
manual
Decrease the distance and angle
Replace both batteries
Wait 5-10 seconds and the unit will
automatically return to normal style
Repeat the operation one more time
Switch the unit off for 1-2 minutes and then
switch it on again
Correct the TV settings
General information
Solution
15