Hyundai H-LCDVD906T Instruction Manual page 12

Operation
operations please refer to "Button functions"
chapter.
JPEG playback notes:
• While a file playback, press
thumbnails will be shown on the screen.
• Press cursor buttons to select the desired
picture.
• Press number buttons to input directly the
number of the desired picture.
• Use cursor buttons to select SLIDE SHOW
item, then press or ENTER button to start
slide show.
• Use cursor buttons to select MENU item,
then press or ENTER button to enter button
function menu.
The button function menu is as follows:
Button
Entering thumbnail mode
Next picture
Previous picture
To play picture
Select CONTINUE item and press ENTER
button to go to the other menu page:
Rotate 90 degrees
anticlockwise
Rotate 90 degrees clockwise
ZOOM Change zoom mode
Select EXIT MENU item and press ENTER
button to exit.
Depending on file volume and encoding,
some delay is possible when changing modes
or passing to the next menu item.
USB/SD/MMC operations
Insert a USB drive in the USB port, then
press SOURCE button and press
to select Media mode.
Insert an SD or MMC card into the Memory
card slot, then press SOURCE button and
press / buttons to select Media mode.
Operations with USB/SD/MMC file playback
12
button, 12
Function
/ buttons
are the same as file disc operations.
SD/MMC/USB up to 16 Gb are
supported by this unit. FAT32/NTFS file systems
are supported. Please use USB devices and
memory cards of famous brands; some models
of USB devices or memory cards cannot be
supported by this unit due to incompatibility.
Ripping
This unit has Ripping function making it
handy and quick to copy audio files (e.g.
music) from CDs. RIPPING is converting from
CDDA format to the compressed MP3 format
onto a USB drive. In the course of copying, ID3
tags are generated automatically in Russian
and English, depending on the source. If the
disc does not contain such information in
CD-text format, ID3 tags will be written as
"Unknown artist" and "Unknown album".
RIPPING function has a simple and intuitive
menu. To display the Ripping menu, press
RIPPING/MENU button on the RC while CD
playback. A USB-drive should be connected to
the unit.
Create ID3 Yes
For navigation in the menu use cursor
buttons and press ENTER button to confirm
your option. In "Options" column you may
set speed and bit rate for ripping. In "Track"
column you may select tracks for ripping (press
ENTER button to select a highlighted track).
Besides, you can select all tracks ("Select all")
or cancel your choice ("Select none"). To start
converting process, select "Start" and press
ENTER button.