Cisco ASR 901 10G Series Hardware Installation Manual page 46

Mounting the Cisco ASR 901 10G Router
In the accessory kit, locate the two cable holders and the two pan-head Phillips head screws used to
Step 1
attach the cable holders to the router. (part number of cable holder is 52-0685-01.)
Set the parts aside.
Step 2
Insert the DC power cord through the cable holder. See
Step 3
power cord.
Figure 3-11
1
DC power cord
Use a Phillips head screwdriver to attach the cable holders to the front of the router with the two screws
Step 4
from the accessory kit. See
Figure 3-12
1 Cable holder
3 DC terminal
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
3-14
Inserting the DC Power Cord Through Cable Holder
2
1
Figure 3-12.
Attaching Cable Holder to the Router
2 1 3
Chapter 3 Installing the Cisco ASR 901 10G Router
Figure 3-11. Repeat this step for the second DC
2
Cable holder
3 1 2
2 DC power cord
4 —
OL-28105-02