Checking The Engine-Oil Level; Adjusting The Tire Pressure - Toro Power Max 826 OXE Operator's Manual

Figure 11
5. Align the holes in the nested ends of the rods
and insert 2 carriage bolts (from the loose-parts
bag) through the short rod from the left side of
the machine (from the operating position).
6. Insert the cable clip that supports the deflector
cable onto the forward carriage bolt, and secure
the carriage bolts with the locknuts from the
loose-parts bag (Figure
Figure 12
1. Cable clip
7. Hold the blue trigger cap down and rotate the
Quick Stick in a circle to ensure that the chute
and deflector operate smoothly.
g018885
g018885
12).
g000991
2. Deflector cable
5
Checking the Engine-Oil
Level
No Parts Required
Procedure
Note:
Your machine comes with oil in the engine
crankcase. Before starting the engine, check the oil
level and add oil if necessary.
Refer to Checking the Engine-Oil Level (page
6

Adjusting the Tire Pressure

No Parts Required
Procedure
9
Figure 13
20).
g210347
g214946