4. Set the camera
4.4 Recording setting (SD Memory Card)
4.4
Recording setting (SD Memory Card)
4.4.1
Install the SD Memory Card
(1) Remove the enclosure
(2) Insert a microSD memory card into the slot
4.4.2
Record using SD Memory Card
Set the schedule type to [SD memory recording] and record on an SD. This section describes the
procedures for turning [Save trigger] to [Manual save].
Refer to the following for how to mount the SD card.
→4.4.1 Install the SD Memory Card
➣ Live image page setup panel>[Detailed setting]>[Camera detailed setting]>[Display]>
Advanced Menu>[Basic]>When [SD memory card] is clicked, the SD Memory Card setup
page is displayed.
(1) Select [Recording format] streams
(2) Select [Save trigger] and click [Set].
(3) Click [Live] in the upper left corner and click the camera control panel button.
・ The camera control panel is displayed.
(4) Click [Start] on [Rec. on SD]
・ Start recording to the SD Memory Card manually.
・ You can stop recording by clicking [Stop]. After stopping, you can resume recording by
clicking [Start].
Use the SD Memory Card formatted on this unit.
To remove the SD Memory Card, select [SD memory card] [Not use] from the
[Basic] > [SD memory card] tabs in the Advanced menu. Then, turn the power off
and remove the SD Memory Card.
14