Oneida Air Systems Dust Deputy Deluxe Manual page 19

Assembly Instructions (Continued)
Make sure there are no air leaks at the connections. Review
10
[FIG. 10] for common leak points.
Note: Any air leak in the lid or drum will affect separation
performance. Make sure to check your dust drum frequently
so you do not overfill it. One option to check for air leaks
is with a smoke test. Found at most hardware stores in the
HVAC section. Introduce smoke around every leak point. If
you see the smoke being drawn into the system, you've found
an air leak that needs to be sealed.
Leak Point
(Inlet)
Leak Point
(Outlet)
FIG. 10
Leak Point
(Cyclone/lid)
Leak Point
(Lid/drum)
oneida-air.com 19