Oneida Air Systems Dust Deputy Deluxe Manual page 17

Assembly Instructions (Continued)
For AXD250004 continue to step 9 on page 18.
8
Attach one Elbow (L) to the top outlet of the Cyclone (A)
and affix Hose (K) to the tapered end of the Elbow. Attach
the other open end of Hose to the second Elbow and attach
to the inlet of your wet/dry vacuum.
Connect the Cyclone's inlet (sideways facing port) to your
dust producing tool with your vacuum's hose or ductwork
[FIG. 8a].
Note: If your vacuum hose is not tight on the inlet or it keeps
pulling off, use the Clamp Band (M) and/or the two O-Rings
(N) [FIG. 8b] [FIG. 8c].
To wet/dry
vacuum
L
To Tool
K
FIG. 8a
M N
FIG. 8b FIG. 8c
oneida-air.com 17