Assembly Instructions (Continued)
The Caster assemblies must be adhered to the Bucket (F)
5
with a single smooth motion so that the bottom edge of the
Bucket fits within the recessed channel of the Caster Mount
[FIG. 5a].
Remove the backing paper from the Double Sided Tape (H)
on the Caster assembly. Rest the lip of the Caster assembly
against the bottom of the Bucket and then rotate the Caster
assemblies flush against the side of the Bucket. Press firmly
for a secure fit [FIG. 5b].
Note: To more securely attach the Caster Mounts to the
Bucket we recommend a ¼"-20 nut and ¼"-20 x 1/2" bolt.
F
Recessed
channel
FIG. 5a
G
FIG. 5b
To further Secure
the Caster Mount
F
G
oneida-air.com
13