Assembly Instructions (Continued)
Thread the Wheels (I1) into the threaded insert on the
2
bottom of the Caster Mounts (G). Securely tighten using the
included Wrench (I2) [FIG. 2].
Ensure that the surfaces on the Bucket (F) and Caster
3
Mounts (G) are clean and dry. Remove a square from the
Double Sided Tape (H) and apply to the Caster Mount in
the recessed location at each corner [FIG 3].
G
I2
I1
Threaded
Insert
FIG. 2
G
FIG. 3
oneida-air.com
11