T40 Torx Screw - MB QUART MBQR-SUB-2 Installation Manual

DASH AREA DISASSEMBLY 2018.5 Turbo S & 2019+ RZR - Continued
STEP 4 – REMOVE DYNAMIX
Lower pocket removal is (1) T40 screw on the pocket support bracket as shown in Figure 7-4b.
Figure 7-4a
STEP 5 – REMOVE LOWER POCKET AND PASSENGER SIDE CUBBY
MB Quart source unit installs. Next, remove (2) plastic push clips in the passenger side cubby as shown in
Figure 7-5a
STEP 6 – REMOVE CENTER SWITCH HARDWARE
Remove (4) T40 screws located above the center
Command, (2) will be on each side of the screen and (2)
Figure 7-6a
®
ECU BRACKET OR POCKET SCREW
8

T40 Torx Screw

Figure 7-4b
Figure 7-5b
Figure 7-6b
©2020 Maxxsonics USA, Inc.