Communication Ports; Copper Ethernet Ports - Siemens SIMATIC NET RUGGEDCOM RS1600T Installation Manual

Communication Ports

The RUGGEDCOM RS1600T can be equipped with various types of communication
ports to enhance its abilities and performance. To determine which ports are
equipped on the device, refer to the factory data file available through RUGGEDCOM
RS1600T. For more information on how to access the factory data file, refer to the
"RUGGEDCOM RS1600T User Guide" for the RUGGEDCOM RS1600T.
Each communication port type has a specific place in the RUGGEDCOM RS1600T
chassis.
1
2
Figure 4.1
4.1

Copper Ethernet Ports

The RUGGEDCOM RS1600T supports several 10/100Base-TX Ethernet ports that allow
connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with
RJ45 male connectors. The RJ45 connectors are directly connected to the chassis
ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables.
Each port features a Speed and Link LED that indicates the state of the port.
Speed
Link
RUGGEDCOM RS1600T
Installation Manual, 11/2022, C79000-G8976-1015-04
Ports 1 to 14
Ports 15 to 16
Port Assignment
Port
1 to 14
15 to 16
LED
1
10/100Base-TX
100Base-FX
State
Yellow
Off
Yellow (Solid)
Yellow (Blinking)
Off
2
Type
Description
The port is operating at 100
Mbps
The port is operating at 10 Mbps
Link established
Link activity
No link detected
4
19