Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SICK KTM-LP2218 P Series
Summary of Contents for SICK KTM-LP2218 P Series
- Page 1 O P E R A T I N G I N S T R U C T I O N KTML Contrast sensors...
- Page 2 This work is protected by copyright. Any rights derived from the copyright shall be reserved for SICK AG. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Any modi‐...
-
Page 3: Table Of Contents
10.2 Dimensional drawing................Recommended accessories............24 Annex....................25 12.1 Conformities and certificates..............8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML Subject to change without notice... - Page 4 CONTENTS 12.2 Licenses....................O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice...
-
Page 5: About This Document
Indicates a situation presenting possible danger, which may lead to property damage if not prevented. 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML... - Page 6 Follow the order in which the numbered instructions are given. ✓ The tick denotes the results of an action. O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice...
-
Page 7: Safety Information
Any work on the product may only be carried out by personnel qualified and authorized to do so. 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML... -
Page 8: Intended Use
The system designer must provide measures to ensure the safety of persons and systems in accordance with the legal guidelines. SICK AG assumes no liability for losses or damage arising from the use of the product, either directly or indirectly. This applies in particular to use of the product that does not conform to its intended purpose and is not described in this documentation. -
Page 9: Mounting
To secure a stable detection when having high gloss material a tilt angle of 10°-15° might be necessary. 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML... - Page 10 Distance x: KTM-Lx22xxxx = 50 mm KTM-Lx55xxxx = 250 mm O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice...
-
Page 11: Operating And Status Indicators
When locked, the yellow indicator will not lit even when teach-in button is pressed. To unlock, press teach in button for 30 seconds. 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML... -
Page 12: Electrical Installation
If these instructions are not complied with, the IP enclosure rating for the device is not guaranteed! O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice... -
Page 13: Pin Assignment Of The Connections
Output voltage: max. 30 V DC (Class 2) Output current: max. 100 mA Enclosure Type 1 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML Subject to change without notice... -
Page 14: Commissioning
Sensing distance in mm (inch) Figure 6: KTML 250 mm version O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice... -
Page 15: 2-Point-Teach-In (Static) Via Teach-In Button
The light/dark setting is defined using teach-in sequence. Light switch can be achieved by teaching the background first and then the mark. 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML... -
Page 16: Dynamic Teach-In
Dynamic teach-in can also be done via the control cable. Control cable High > 30 ms. Connecting pin 2 (ET) to pin 1 +(L+). O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice... - Page 17 This can be reversed if mark is longer in the field of view during the teach in process. 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML...
-
Page 18: Troubleshooting
5 Hz pulse via switching • Try tilting the sensor output Q O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice... -
Page 19: Maintenance
► NOTE Static charge may cause dust particles to stick to the light emission window. This effect can be avoided by using an anti-static glass cleaner in combination with the SICK lens cloth (can be obtained from www.sick.com). NOTE If the light emission window is scratched or damaged (cracked or broken), the device must be replaced. - Page 20 In order to ensure that the heat produced by the internal power loss is adequately dissipated, the housing surface must be kept clean. O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice...
-
Page 21: Disassembly And Disposal
This symbol on the product, its package or in this document, indicates that a product is subject to these regulations. 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML... -
Page 22: Technical Data
At mark size = 1.5 mm Signal transit time with resistive load O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK Subject to change without notice... -
Page 23: Dimensional Drawing
Center of optical axis, receiver M3 threaded mounting hole Operating and status indicators 8025181.1EEN/06.02.2023 | SICK O P E R A T I N G I N S T R U C T I O N | KTML Subject to change without notice... -
Page 24: Recommended Accessories
Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 5 m These are only examples and recommendations. Please refer to the SICK website for more connector cable options. O P E R A T I N G I N S T R U C T I O N | KTML 8025181.1EEN/06.02.2023 | SICK... -
Page 25: Annex
You can obtain declarations of conformity, certificates, and the current operating instructions for the product at www.sick.com. To do so, enter the product part number in the search field (part number: see the entry in the “P/N” or “Ident. no.” field on the type label). - Page 26 Phone +7 495 283 09 90 E-Mail info@sick.com E-Mail office@sick.com.gr E-Mail info@sick.ru Vietnam Hong Kong Singapore Phone +65 6744 3732 Phone +852 2153 6300 Phone +65 6744 3732 E-Mail sales.gsg@sick.com E-Mail ghk@sick.com.hk E-Mail sales.gsg@sick.com Detailed addresses and further locations at www.sick.com SICK AG | Waldkirch | Germany | www.sick.com...
Need help?
Do you have a question about the KTM-LP2218 P Series and is the answer not in the manual?
Questions and answers