Maintaining Your Vacuum Cleaner; Removing And Emptying The Dust Bin; Checking For Blockages - Dirt Devil UP04 User Manual

MAINTAINING YOUR VACUUM
CLEANER
Removing and emptying
the dust canister
Removing and emptying Removing and emptying Removing and emptying
the dust canister the dust canister the dust canister

REMOVING AND EMPTYING THE DUST BIN

Ensure the vacuum is switched off before emptying the dust bin.
Press dust canister
Press dust canister Press dust canister Press dust canister
release button to
1. Press dust bin release button
to remove the dust bin.
release button to release button to release button to
remove the dust
remove the dust remove the dust remove the dust
canister.
canister. canister. canister.
WARNING
If the filter or main hose is clogged, the motor may shut down in order to protect itself from
WARNING: If the filter or hose is clogged, the motor may shut down in
WARNING: If the filter or hose is clogged, the motor may shut down in WARNING: If the filter or hose is clogged, the motor may shut down in WARNING: If the filter or hose is clogged, the motor may shut down in
overheating. If this occurs, unplug the vacuum, clean the filter and inspect the hoses and bin for
order to protect itself from overheating. If this occurs, unplug the
order to protect itself from overheating. If this occurs, unplug the order to protect itself from overheating. If this occurs, unplug the clogging. Allow 1 hour for the unit to fully cool down before resuming use. order to protect itself from overheating. If this occurs, unplug the
vacuum, clean the filter and inspect the hoses and canister for clogging.
vacuum, clean the filter and inspect the hoses and canister for clogging. vacuum, clean the filter and inspect the hoses and canister for clogging. vacuum, clean the filter and inspect the hoses and canister for clogging.
Allow hour for the unit to fully cool down before resuming use.
Allow hour for the unit to fully cool down before resuming use. Allow hour for the unit to fully cool down before resuming use. Allow hour for the unit to fully cool down before resuming use.

CHECKING FOR BLOCKAGES

Checking for blockages Checking for blockages Checking for blockages
Checking for blockages
1. Inspect the lower tube and nozzle and remove any dirt and
Inspect the lower tube and nozzle and Inspect the lower tube and nozzle and Inspect the lower tube and nozzle and
Inspect the lower tube and nozzle and
debris.
remove any dirt and debris. remove any dirt and debris. remove any dirt and debris.
remove any dirt and debris.
2. The internal hose can be removed from the nozzle if
needed.
The lower hose can be removed from The lower hose can be removed from The lower hose can be removed from
The lower hose can be removed from
3. Remove the main hose by rotating the connector to unlock,
the nozzle if needed. the nozzle if needed. the nozzle if needed.
the nozzle if needed. and check for blockages in the hose and elbow connector.
4. Remove the dust bin, and follow the steps on the next page
Remove the main hose by rotating the Remove the main hose by rotating the Remove the main hose by rotating the
for cleaning.
Remove the main hose by rotating the
connector to unlock, and check for connector to unlock, and check for connector to unlock, and check for
connector to unlock, and check for
blockages in the hose and elbow connector. blockages in the hose and elbow connector. blockages in the hose and elbow connector.
blockages in the hose and elbow connector.
Remove the dust canister, and follow the steps Remove the dust canister, and follow the steps Remove the dust canister, and follow the steps
Hold dust canister over
Hold dust canister over Hold dust canister over Hold dust canister over
rubbish bin and unclip
2. Hold dust bin over your rubbish
bin and unclip the lock on the
rubbish bin and unclip rubbish bin and unclip rubbish bin and unclip
the lock on the bottom
bottom of the bin, allowing the
the lock on the bottom the lock on the bottom the lock on the bottom
of the canister, allowing
dust to empty.
of the canister, allowing of the canister, allowing of the canister, allowing
the dust to empty.
the dust to empty. the dust to empty. the dust to empty.
Close the base of the
Close the base of the Close the base of the Close the base of the
dust canister, align the
3. Close the base of the dust bin,
align the bin's base back onto the
dust canister, align the dust canister, align the dust canister, align the
canister base back onto
machine and push until it clicks
canister base back onto canister base back onto canister base back onto
the machine and push
back into place.
the machine and push the machine and push the machine and push
until it clicks back
until it clicks back until it clicks back until it clicks back
into place.
into place. into place. into place.
USER MANUAL 11