Table of Contents
Advertisement
---
Operation
Assembling the vacuum cleaner
Assembly and disassembly of the tube
• Assemble:
Insert the tube in the air intake opening.
Push the tube in until it locks in place
• Disassemble:
Take the tube from the air intake after
disconnecting from the mains socket.
Assembling the telescope tube and accessories
1) Remove the telescope tube from the hand grip.
2) Set the telescope tube to the correct length.
3) Push the telescope tube slide forwards and pull
out the lower part of t he tube to the extension
length required. Then simply let go of the slide
and let it snap into place
4) Fix the floor brush to the telescope tube.
5) Suitable for everyday cleaning of the carpet and of
wooden floors by adjusting the combination floor head.
4
AU: 1300 361 505 / NZ: 0800 800 900
Dirt Devil Service line
Advertisement
Table of Contents
