If you have any questions, please email info@dirtdevil.co.uk to get in contact. CONTENTS Safety instructions ..................3 Getting to know your Dirt Devil vacuum cleaner ........7 Assembling your vacuum cleaner ............... 8 Using your vacuum cleaner ................9 Maintaining your vacuum cleaner .............. 11...
IMPORTANT SAFETY INSTRUCTIONS FOR INDOOR USE ONLY WARNING When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: USING THE VACUUM CLEANER •...
Page 4
• DO NOT use with a damaged on again. cord or plug. • Use genuine Dirt Devil filters • DO NOT pick up or pull the and attachments only. Using vacuum cleaner by the cord. non-genuine accessories may •...
Page 5
IMPORTANT SAFETY INSTRUCTIONS FOR INDOOR USE ONLY AUTOMATIC THERMAL CUT OUT • Never leave the vacuum cleaner connected to the A safety thermostat inside mains without supervision. the cleaner protects the • Keep the floor nozzle away motor from overheating if the from hair, face, fingers, airways or filters are clogged.
Page 6
WHAT TO EXPECT FROM YOUR USER MANUAL Your user manual contains lots of handy information about your Dirt Devil appliance. Please have a read and keep it somewhere safe for future reference. Here’s what you can expect from the different user manual sections.
GETTING TO KNOW YOUR VACUUM CLEANER FEATURES SPARE PARTS Main hose Part no. DVLS00035 3-in-1 tool Part no. DVLS00036 Handle HEPA pre-motor filter Part no. DVLS00041 Brush roll Part no. DVLS00046 Drive belt Part no. DVLS00032 Pet tool Dust Bin Release Button Part no.
ASSEMBLING YOUR VACUUM CLEANER ASSEMBLING YOUR LIGHTWEIGHT PET UPRIGHT Before assembling or disassembling attachments, ensure the upright vacuum is not plugged into the mains supply and is switched off. 1. Remove the dust bin before installing handle. 2. Place the dust bin back onto the machine Push the handle onto the vacuum body, and use and push until it clicks into place.
USING YOUR VACUUM CLEANER USING YOUR LIGHTWEIGHT PET UPRIGHT 1. Plug in your machine and push 2. Step on the brush cover and 3. To maintain optimal power button to switch ON/OFF. pull back on handle, to engage for performance, please empty dust operation.
Page 10
USING YOUR VACUUM CLEANER USING THE ATTACHMENTS 1. Remove the main hose handle from the Remove the hose handle from Remove the hose handle from machine. Always ensure the vacuum is in upright (parked position) when using the main hose. the machine.
MAINTAINING YOUR VACUUM CLEANER Removing and emptying the dust canister Removing and emptying Removing and emptying Removing and emptying the dust canister the dust canister the dust canister REMOVING AND EMPTYING THE DUST BIN Ensure the vacuum is switched off before emptying the dust bin. Press dust canister Hold dust canister over Close the base of the...
MAINTAINING YOUR VACUUM CLEANER Cleaning the filters Cleaning the filters Before starting any cleaning, ensure the upright vac is not plugged into CLEANING THE FILTERS Before starting any cleaning, ensure the upright vac is not plugged into Wash with water every month , allow at least 24 hours to dry and Before starting any cleaning, ensure the upright vacuum is not plugged into the mains supply and is switched make sure it is dry thoroughly before re-using Wash with water every month , allow at least 24 hours to dry and...
MAINTAINING YOUR VACUUM CLEANER CLEANING THE FILTERS WARNING Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. DO NOT operate without filter installed DO NOT wash dust bin in the dishwasher DO NOT install filter if it is damp CAUTION DO NOT turn the appliance on when the dust bin is removed.
MAINTENANCE • Do not clean the vacuum cleaner, components or accessories using MAINTAINING YOUR VACUUM petrol or any other flammable liquid or solvents, etc. • Clean only the outside of the vacuum cleaner. CLEANER • Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and accessories.
MAINTAINING YOUR VACUUM CLEANER Replacing The Drive Belt REPLACING THE DRIVE BELT The drive belt is not included as spare part, contact Customer Service helpline on the back page if a replacement is needed. Make sure the vacuum is switched off and unplugged first. Check the drive belt carefully for wear, cuts and stressed areas.
TROUBLESHOOTING WARNING To reduce the risk of shock and unintended operation, turn off power and unplug from the mains before servicing. Problem Solution 1.Empty the dust bin and clean the filters. 2.Check for blockages in the airpath: nozzle hose and connector, main hose, and the elbow connector between Low suction power the hose and dust bin.
SPECIFICATION Model UP04 Power 400W Capacity Weight 4.7kg Main hose length Cord length 6.3m Sound 78.5dB Dimensions (LxWxH) 31 x 30 x 106cm Filter type HEPA Input voltage 220-240V Current 50Hz WARNING: The above data has been supplied by the manufacturing plant and tested in laboratory conditions.
Pictures are for illustration purposes only and may differ from the actual product. We are constantly striving to improve our products and the specifications contained herein are subject to change without notice. Made in China. DIRT DEVIL is a registered trademark of Techtronic Cordless GP and is used under licence by Connect Distribution Services Ltd.
Need help?
Do you have a question about the UP04 and is the answer not in the manual?
Questions and answers