Cind Indicator Control - Nokia 8210 Command List

+CIND Indicator Control

AT Command Set for Nokia 8210
Queries the current status of ME physical indicators. Number of supported <ind>s
depend on the product. Indicator writing not supported by NMP products ('set'
command returns always ERROR, or +CME ERROR when allowed by +CMEE).
Note that all indicators that can be read with +CIND? must also be available as
unsolicited +CIEV result codes (if +CMER=? indicates that +CIEV codes are
supported). (GSM 07.07 section 8.9.)
Syntax:
AT+CIND=
AT+CIND?
AT+CIND=?
Parameters:
<ind>: integer type value, which shall be in range of corresponding <descr>
<descr> values reserved and their <ind> ranges:
"battchg"
"signal"
"service"
"sounder"
"message"
"call"
"vox"
"roam"
"smsfull"
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
Query current setting.
Response is +CIND: <ind>[,<ind>[,...]]
Show supported values.
Response is +CIND:(list of supported
<ind>'s)
battery charge level (0-5)
signal quality (0-5)
service availability (0-1)
sounder activity (0-1)
message received (0-1)
call in progress (0-1)
transmit activated by voice activity (0-1)
roaming indicator (0-1)
a short message memory storage in the
MT has become full (1), or memory
locations are available (0); i.e. the range is
(0-1)
17