Nokia 8210 Command List page 20

AT Command Set for Nokia 8210
For some products <fac>="NT" is only applicable with Nokia 8110 and compatible
phones.
Syntax:
AT+CLCK=<fac>,
<mode>, <passwd>,
<class>
AT+CLCK=?
Parameters:
<fac>:
"CS"
"PS"
"SC"
"AO"
"OI"
"OX"
"AI"
"IR"
"NT"
"NM"
"NS"
"NA"
"AB"
"AG"
"AC"
"FD"
<mode>:
0
1
2
<status>:
0
1
<passwd>: string type; shall be the same as password specified for the facility from
the ME user interface or with command Change Password +CPWD
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
When <mode>=2: the response is
+CLCK: <status>[,<class1>
[<CR><LF>+CLCK: <status>,<class2>
[...]]].
The default option is [,,,7].
Show supported values.
Response is +CLCK:(list of supported
<fac>'s).
CNTRL (lock CoNTRoL surface (e.g.
phone keyboard))
PH-SIM (lock PHone to SIM card) (ME
asks password when other than current
SIM card inserted)
SIM (lock SIM card) (SIM asks password
in ME power-up and when this lock
command issued)
BAOC (Barr All Outgoing Calls)
(GSM 02.88, clause 1)
BOIC (Barr Outgoing International Calls)
(GSM 02.88, clause 1)
BOIC-exHC (Barr Outgoing International
Calls except to Home Country)
(GSM 02.88, clause 1)
BAIC (Barr All Incoming Calls)
(GSM 02.88, clause 2)
BIC-Roam (Barr Incoming Calls when
Roaming outside the home country)
(GSM 02.88, clause 2)
barr incoming calls from numbers Not
stored to TA memory
barr incoming calls from numbers Not
stored to ME memory
barr incoming calls from numbers Not
stored to SIM memory
barr incoming calls from numbers Not
stored in Any memory
All Barring services (GSM 02.30)
All outGoing barring services (GSM 02.30)
All inComing barring services
(GSM 02.30)
SIM fixed dialling memory feature (if PIN2
authentication has not been done during
the current session, PIN2 is required as
<passwd>)
unlock
lock
query status
not active
active
19