Cops Operator Selection - Nokia 8210 Command List

+COPS Operator Selection

AT Command Set for Nokia 8210
'Set' command selects network or sets automatic network selection. 'Read' command
returns current network. 'Test' command returns available networks. Short
alphanumeric operator name format (<format>=1) and selection <mode>=2 and =4
not supported by NMP products. (GSM 07.07 section 7.3.)
Syntax:
AT+COPS=<mode>,<format>,<oper>
AT+COPS?
AT+COPS=?
Parameters:
<mode>:
0
1
2
3
4
<format>:
0
1
2
<format>: string type; returned <oper> shall not be in BCD format, but in IRA
characters converted from BCD; hence the number has structure: (country code digit
3)(country code digit 2)(country code digit 1)(network code digit 2)(network code digit
1).
<oper>: indicates if the format is alphanumeric or numeric; long alphanumeric format
can be upto 16 characters long and short format up to 8 characters (GSM MoU
SE.13); numeric format is the GSM Location Area Identification number (GSM 04.08,
subclause 10.5.1.3) which consists of a three BCD digit country code coded as in
ITU-T E.212 Annex A, plus a two BCD digit network code, which is administration
specific.
<stat>:
0
1
2
3
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
The default option is [0],0.
Query current setting.
Response is +COPS:
<mode>[,<format>,<oper>]
Show supported values.
Response is +COPS: [list of supported
(<stat>,long alphanumeric <oper> ,short
alphanumeric <oper>,numeric <oper>)s]
[,,(list of supported <mode>s),(list of
supported <format>s)]
automatic (<oper> field is ignored)
manual (<oper> field shall be present)
deregister from network
set only <format> (for read command
+COPS?), do not attempt
registration/deregistration (<oper> field is
ignored); this value is not applicable in
read command response
manual/automatic (<oper> field shall be
present); if manual selection fails,
automatic mode (<mode>=0) is entered
long format alphanumeric <oper>
short format alphanumeric <oper>
numeric <oper>
unknown
available
current
forbidden
29